Logo Home About Contact Search Locations
         

 Legacy Rustic Grain

Legacy Rustic Grain Plank   4 Colors
5" x 48" x .157" Plank, 20mil Wear Layer 
Wood Grain Embossing
Lifetime Residential/10 Year Commercial Warranty

 

 Legacy Fine Grain

Legacy Fine Grain Plank   4 Colors
5" x 48" x .157" Plank, 20mil Wear Layer 
Wood Grain Embossing
Lifetime Residential/10 Year Commercial Warranty

 

 Bamboo Plank

Bamboo   6 Colors    
4" x 36" x .125" Plank, 20mil Wear Layer 
Smooth Embossing
20 Year Residential/10 Year Commercial Warranty

         

 Wood Classic Plank

Wood Classic Plank   6 Colors
7.24" x 37.4" x .125" Plank, 20mil Wear Layer 
Registered Embossing
20 Year Residential/10 Year Commercial Warranty

 
 Wood Antique Plank

Wood Antique Plank   10 Colors
4" x 36" x .125" Plank, 32mil Wear Layer 
Ticked Embossing
20 Year Residential/10 Year Commercial Warranty
 

 Dakota Plank

Dakota Plank   6 Colors
6" x 36" x .125" Plank, 32mil Wear Layer 
Ticked Embossing
20 Year Residential/10 Year Commercial Warranty

         

 Montana Plank

Montana Plank   6 Colors
7.25" x 37.4" x .125" Plank, 20mil Wear Layer 
Ribbed Embossing
20 Year Residential/10 Year Commercial Warranty

 
 Vintage Plank

Vintage Plank / Vintage Floral   4 Colors
7.32" x 37" x .125" Plank, 20mil Wear Layer 
Ribbed Embossing
20 Year Residential/10 Year Commercial Warranty
 
 Soledo Plank

Soledo Plank   8 Colors
4.5" x 36" .080" Plank, 12mil Wear Layer 
Natural Grain Embossing
12 Year Residential/6 Year Commercial Warranty
         
 Sonoma Plank

Sonoma Plank   4 Colors
6" x 36" .080" Plank, 12mil Wear Layer 
Handscraped, Registered Embossing
12 Year Residential/6 Year Commercial Warranty
 
 Bradford Plank

Bradford Plank   3 Colors
6" x 36" .080" Plank, 12mil Wear Layer 
Ticked Embossing
12 Year Residential/6 Year Commercial Warranty
 
 Remington Plank

Remington Plank   4 Colors
6" x 36" .080" Plank, 12mil Wear Layer 
Rough Pine, Ribbed Embossing
12 Year Residential/6 Year Commercial Warranty
         
 Aberdeen Plank

Aberdeen Plank   5 Colors
4" x 36" .098" Plank, 6mil Wear Layer 
Ribbed Embossing
10 Year Residential/5 Year Commercial Warranty
 
 Doral Horizontal Bamboo

Doral Horizontal Bamboo   2 Colors
4" x 36" .080" Plank, 6mil Wear Layer 
Textured Embossing
10 Year Residential/5 Year Commercial Warranty
 
 Doral Vertical Bamboo

Doral Vertical Bamboo   2 Colors
4" x 36" .080" Plank, 6mil Wear Layer 
Textured Embossing
10 Year Residential/5 Year Commercial Warranty
         
 Innsbruck Plank

Innsbruck Plank   3 Colors
6" x 36" .080" Plank, 8mil Wear Layer 
Ribbed Grain Embossing
10 Year Residential/5 Year Commercial Warranty
 
 Pacific Plank

Pacific Plank   3 Colors
6" x 36" .080" Plank, 6mil Wear Layer 
Registered Embossing
10 Year Residential/5 Year Commercial Warranty
 
 Rapture Plank

Rapture Plank   3 Colors
7" x 36" .125" Plank, 6mil Wear Layer 
Wood Grain Embossing
10 Year Residential/5 Year Commercial Warranty
         
  Installing Earthwerks         Limited Wear Warranty
         
Subfloor Requirements
All subfloors should be inspected prior to installation. All subfloors must be smooth, clean, dry, structurally sound, and free of dust, dirt, oil, wax, paint or any other contaminant that would inhibit a good bond.
 
Use a quality Portland-Cement based patching compound to fill or smooth irregularities that could show through the new flooring.
 
Concrete on or above grade must be free of moisture or high alkalinity and be protected by a moisture barrier installed at the time of construction. A concrete slab shall be cured a minimum of 90 days before performing moisture tests prior to the installation of your new flooring. These time periods are absolute minimum and the concrete may require additional drying time dependant upon local environmental conditions.
 
 
 
Installation Over Other Flooring Surfaces
If you are installing EarthWerks flooring over one layer of existing non-cushioned floor covering, it should be well adhered to the subfloor, or scraped off before installing your new EarthWerks Vinyl Tile. The use of a good quality embossing leveler to fill in the surface texture of the existing floor is required. Otherwise, the profile of the existing floor will telegraph thru the new flooring and adhesive may not cure correctly.
When tiles are installed over concrete, wood, or pre-existing resilient floors, apply ST 100 Pressure Sensitive Adhesive using a 1/16” x 1/16” x 1/16” square-notched trowel. Allow adhesive open time so it can dry to the consistency of contact cement. Tack time will vary depending upon temperature and humidity, and you will also observe the color change from white to yellow. Observing this open time is very important to ensure proper bonding and to prevent possible bleed through. At that point, you can apply tiles.
 
The manufacturer will repair or furnish replacement materials if there is a manufacturing defect for a period of one year from the original date of purchase.

The manufacturer will furnish replacement flooring materials if there is an excessive loss of pattern or color. The following conditions will apply:

1. Under normal residential and/or commercial use, depending on product
2. The problem occurs within the number of years specified for each product
3. All installation and maintenance instructions have been followed

This limited warranty applies only to the original purchaser of the product. 

  
Home                    About                    Contact                    Find A Store
 
Login